Applications of single-drop microextraction in analytical chemistry: A review

Single-drop microextraction (SDME) has been recognized as one of the simple miniaturized sample preparation tools for the isolation and preconcentration of several analytes from a complex sample matrix. In this review, we explored the applications of SDME coupled with various analytical techniques (spectroscopy, chromatography, and mass spectrometry) for the analysis of organic molecules, inorganic ions, and biomolecules from various sample matrices including food, environmental, clinical, pharmaceutical, and industrial samples. Also, it summarizes the use of nanoparticles in SDME combined with various analytical tools for the rapid analysis of several trace-level target analytes. An overview of ionic liquids, deep eutectic solvents, and SUPRAS, which improved the selectivity and sensitivity of various analytical techniques toward several analytes, as promising extracting solvent systems in SDME is also included. Finally, discussed the impressive analytical features and future perspectives of SDME in this review article.     

Nanocomposite Polymer Electrolytes of Sodium Alginate and Montmorillonite Clay

Nanocomposite polymer electrolytes (NPEs) were synthesized using sodium alginate (Alg) and either sodium (SCa-3-Na⁺)- or lithium (SCa-3-Li⁺)-modified montmorillonite clays. The samples were characterized by structural, optical, and electrical properties. SCa-3-Na⁺ and SCa-3-Li⁺ clays’ X-ray structural analyses revealed peaks at 2θ = 7.2° and 6.7° that corresponded to the interlamellar distances of 12.3 and 12.8 Å, respectively. Alg-based NPEs X-ray diffractograms showed exfoliated structures for samples with low clay percentages. The increase of clay content promoted the formation of intercalated structures. Electrochemical Impedance Spectroscopy revealed that Alg-based NPEs with 5 wt% of SCa-3-Na⁺ clay presented the highest conductivity of 1.96 × 10⁻² S/cm², and Alg with 10 wt% of SCa-3-Li⁺ showed conductivity of 1.30 × 10⁻² S/cm², both measured at 70 °C. From UV-Vis spectroscopy, it was possible to infer that increasing concentration of clay promoted a decrease of the samples’ transmittance and, consequently, an increase of their reflectance.     

微波消解–ICP–OES法测定陶土中铅和镉含量

建立微波消解–ICP–OES法测定陶土中铅和镉含量的方法。采用氢氟酸–硝酸作为消解液,微波消解法处理样品,消解液定容后直接进入耐氢氟酸的进样系统,用ICP–OES法测定陶土中重金属铅和镉的含量。结果表明,Pb和Cd检出限分别为0.027μg/m L和0.011μg/m L,回收率分别为90.5%~98.8%和95.0%~98.4%,测定结果相对标准偏差分别为1.38%和2.17%(n=7)。该方法具有快速、准确、灵敏度高等优点,适用于陶土中铅和镉含量的检测。     

Green synthesis of bio-ethyl acetate over Egyptian natural red clay as a highly active,selective, and eco-friendly catalyst

The present work focused on the utilization of Egyptian red clay (ERC) without any treatment as a highly efficient, selective, and eco-friendly catalyst for synthesis of bio-ethyl acetate in the gas phase. The best conditions used in conventional fixed bed reactor were 130 cm³/min total flow rate of air with 1.6 and 2.1 vol% bio-ethanol and bio-acetic acid, respectively, 1 g clay catalyst calcined at 300 and 225°C reaction temperature. Under these conditions, the conversions to ester achieved were about 80 and 98% after 5 and 30 min, respectively, from the initial admission of the reactants into the reactor. The amount and type of surface acidity were identified by isopropanol reaction and chemisorption of basic probes. The results demonstrated that the majority of intermediate strength of BrØnsted acid sites are the key role for the dehydration reaction toward ester formation. The virgin and annealed clay solids were characterized using X-ray fluorescence (XRF), thermogravimetry (TG) and differential thermal analysis (DTA), Fourier transform infrared (FTIR), X-ray diffraction (XRD), and N₂ sorption.     

Sterically Demanding AgI and CuI N-Heterocyclic Carbene Complexes: Synthesis,Structures, Steric Parameters,and Catalytic Activity

The synthesis and full characterization of new air-stable Ag^I and Cu^I complexes bearing structurally bulky expanded-ring N-heterocyclic carbene (erNHC) ligands is presented. The condensation of protonated NHC salts with Ag₂O afforded a collection of Ag^I complexes, and their first use as ligand transfer reagents led to novel isostructural Cu^I or Au^I complexes. In situ deprotonation of the NHC salts in the presence of a copper(I) source, provides a library of new Cu^I complexes. The solid-state structures feature large N-C_NHC-N angles (118–128°) and almost identical angles between the aryl groups on the nitrogen atoms and the plane of the N-C-N unit of the carbene (i.e. torsion angles close to 0°). Among the steric parameters, the percent buried volume (%V_bur) values span easily in the 50–57 % range, and that one of (9-Dipp)CuBr complex (%V_bur=57.5) overcomes to other known erNHC–metal complexes reported to date. Preliminary catalytic experiments in the copper-catalyzed coupling between N-tosylhydrazone and phenylacetylene, afforded 76–93 % product at the 0.5–2.5 mol % catalyst loading, proving the stability of Cu^I erNHC complexes at elevated temperatures (100 °C).     

A green route for the synthesis of 2-substituted benzoxazole derivatives catalyzed by Al-exchanged K10 clay

A new, simple, and efficient protocol is developed for the synthesis of 2-substituted benzoxazole derivatives through N–C–O bond formation using Al³⁺-exchanged K10 clay (Al³⁺-K10) as catalyst. A wide range of benzoxazole derivatives are synthesized in high yields without affecting many functional groups. Hot filtration experiments showed the absence of metal leaching and catalyst can be reused for five times with only a slight decrease in yield.     

High diffusion barrier and piezoelectric nanocomposites based on polyvinylidene fluoride‐trifluoroethylene copolymer and hydrophobized clay

Nanocomposites based on polyvinylidene fluoride–trifluoroethylene copolymer and up to 4 vol % of hydrophobized clay nanoparticles are investigated. The structure, piezoelectric properties, and oxygen permeability of solvent cast films are analyzed before and after annealing above the Curie temperature of the polymer. Exfoliation of the clay takes place at concentrations up to 1 vol %, beyond which it rapidly drops and is absent at a concentration of 4 vol %. The presence of clay does not change the crystallinity of the polymer, but leads to a threefold decrease of the oxygen permeability at a concentration of 0.5 vol %. Annealing at 130 °C increases the crystallinity, the proportion of β phase up to 94%, and the piezoelectric coefficient by 20–40% at clay fractions below 1 vol %. Annealing also leads to a remarkable 3‐ to 10‐fold decrease of O₂ permeability and to intriguing changes of the activation energy for O₂ transport, which decreases from 56 kJ/mol for the as‐cast polymer to below 10 kJ/mol for the polymer and exfoliated composite. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1828–1836     

An imaginary potential with universal normalization for dissipative processes in heavy-ion reactions

In this work we present new coupled channel calculations with the São Paulo potential (SPP) as the bare interaction, and an imaginary potential with system and energy independent normalization that has been developed to take into account dissipative processes in heavy-ion reactions. This imaginary potential is based on high-energy nucleon interaction in nuclear medium. Our theoretical predictions for energies up to ≈100 MeV/nucleon agree very well with the experimental data for the p,n+nucleus, ¹⁶O + ²⁷Al, ¹⁶O + ⁶⁰Ni, ⁵⁸Ni + ¹²⁴Sn, and weakly bound projectile ⁷Li + ¹²⁰Sn systems.     

Effect of ion exchange by an organic cation on platinum immobilization on clays

Clay-supported platinum catalysts were prepared by ion exchange. The platinum precursor has been reduced either in the presence or in the absence of cinchonidinium cations introduced in the interlamellar space of the cationic clay. The samples were characterized by XRD and TEM. Reduction by NaBH₄ in the absence of cinchonidinium cations and the subsequent introduction of this latter ensured the formation of monodispersed, small platinum crystallites immobilized mostly between the clay sheets. On the other hand, reduction in the presence of the organic cations resulted in migration of the platinum particles on the external surface of the clay.     

部分耗尽SOI MOSFET总剂量效应与偏置状态的关系

实验表明SOI MOSFET掩埋氧化层中的总剂量辐射效应与辐射过程中的偏置状态有关. 对诱发背沟道泄漏电流的陷阱电荷进行了研究. 建立一个数值模型来模拟不同偏置下陷进电荷的建立, 它包括辐射产生的载流子复合和俘获的过程. 模拟结果与实验结果相符, 解释了总剂量辐射效应受偏置状态影响的机理.